Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:graphics_hardware_acceleration_raspberry_pi_2 [2022/10/18 22:51] – [How to check if V3D and/or KMS are active] niccolo
+++ doc:appunti:hardware:graphics_hardware_acceleration_raspberry_pi_2 [2022/10/20 11:15] (current) – [Enable graphics acceleration in Chromium] niccolo
@@ Line 7: / Line 7: @@
 FIXME
-====== How to check if V3D and/or KMS are active ======
+===== How to check if V3D and/or KMS are active =====
 **V3D** is an API provided by the Linux kernel to support 3D graphics on the **VideoCore VI** GPU (RPi 4). The software driver is actually provided in the form of a //Device Tree Overlay// which is loaded at boot time adding the following line into **/boot/config.txt**:
@@ Line 46: / Line 46: @@
 </code>
-====== Enable graphics acceleration in Chromium ======
+===== Enable graphics acceleration in Chromium =====
-====== Enable graphics acceleration in Firefox ======
+In Chromium you can open the page **%%chrome://gpu%%** and check the **Graphics Feature Status**, you should read:
+^ Canvas  | Hardware accelerated  |
+^ Canvas out-of-process rasterization  | Enabled  |
+^ Direct Rendering Display Compositor  | Disabled  |
+^ Compositing  | Hardware accelerated  |
+^ Multiple Raster Threads  | Enabled  |
+^ OpenGL  | Enabled  |
+^ Rasterization  | Hardware accelerated on all pages  |
+^ Raw Draw  | Enabled  |
+^ Video Decode  | Hardware accelerated  |
+^ Video Encode  | Software only. Hardware acceleration disabled  |
+^ Vulkan  | Disabled  |
+^ WebGL  | Hardware accelerated  |
+^ WebGL2  | Hardware accelerated  |
+^ WebGPU  | Disabled  |
+Probably something is disabled, because of Chromium defaults. In that case you have to open the page **%%chrome://flags%%**, then search and set the following flags:
+^ Override software rendering list  | Overrides the built-in software rendering list and enables GPU-acceleration on unsupported system configurations.  |
+^ Enable raw draw  | When enabled, web content will be rastered on output surface directly.  |
+^ GPU rasterization  | Use GPU to rasterize web content.  |
+^ Out-of-process 2D canvas rasterization  | The rasterization of 2d canvas contents is performed in the GPU process.  |
+^ Accelerated 2D canvas  | Enables the use of the GPU to perform 2d canvas rendering instead of using software rendering.  |
+===== Enable graphics acceleration in Firefox =====
 ===== Web References =====
@@ Line 57: / Line 84: @@
   * **[[https://www.dedoimedo.com/computers/rpi4-ubuntu-mate-hw-video-acceleration.html|RPI4 & Ubuntu MATE - How to enable video acceleration]]**
   * **[[https://forums.raspberrypi.com/viewtopic.php?t=320836|(f)KMS on 64-bit Pi 4 firmware question]]**
+  * **[[https://forums.raspberrypi.com/viewtopic.php?t=320844|Chromium/Firefox no HW acceleration]]**