doc:appunti:hardware:ups_apc
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |||
doc:appunti:hardware:ups_apc [2022/11/02 17:39] – [APC Back-UPS CS 500] niccolo | doc:appunti:hardware:ups_apc [2022/11/02 17:49] (current) – [APC Back-UPS CS 500] niccolo | ||
---|---|---|---|
Line 227: | Line 227: | ||
The two most important functions are the **#10 battery calibration** and the **#12 self-test interval**. Battery calibration must be initiated with a fully charged battery and the normal load (it should be above 10%); it will end when battery drops below about 25%. | The two most important functions are the **#10 battery calibration** and the **#12 self-test interval**. Battery calibration must be initiated with a fully charged battery and the normal load (it should be above 10%); it will end when battery drops below about 25%. | ||
- | Unfortunately it seems that the **Back-UPS CS 500** model does not support the configuration of the **periodic self-test**, chosing option #12 results always in self-test interval **// | + | Unfortunately it seems that the **Back-UPS CS 500** model does not support the configuration of the **periodic self-test**; chosing option #12 results always in self-test interval **// |
^ New battery date (MM/ | ^ New battery date (MM/ |
doc/appunti/hardware/ups_apc.1667407140.txt.gz · Last modified: 2022/11/02 17:39 by niccolo