User Tools

Site Tools


doc:appunti:hardware:olympus-e-m10:quick_sleep_problem_in_viewfinder_mode

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
doc:appunti:hardware:olympus-e-m10:quick_sleep_problem_in_viewfinder_mode [2020/09/23 11:46] – created niccolodoc:appunti:hardware:olympus-e-m10:quick_sleep_problem_in_viewfinder_mode [2020/10/08 16:40] (current) niccolo
Line 1: Line 1:
-====== Olympus E-M10 Mark II - Problema con modalità viewfinder e Quick Sleep Mode ======+====== Quick Sleep problem in viewfinder mode ======
  
-La modalità **live view** mostra la scena sia nel mirino (quando l'occhio è vicino al mirino) che nel monitor (allontanando l'occhio). Premendo il pulsante OK il **super control panel** si sovrappone all'immagine. +===== Olympus E-M10 Mark II =====
- +
-Premendo il pulsante //display switching// sulla destra del mirino si passa la modalità **viewfinder**: con l'occhio nel mirino viene mostrata la scena, allontanando l'occhio viene mostrato il super control panel nel monitor. Per impostazione predefinita il super control panel scompare dopo tre secondi e la macchina va in sleep mode: si tratta della modalità **Quick Sleep Mode**. +
- +
-Questa impostazione può essere disattivata da **Custom menu** => K Utility => **Quick Sleep Mode: Off**. +
- +
-  * **[[https://www.dpreview.com/forums/thread/4001007|Olympus OM-D E-M5 MarkII problem with super control panel]]** +
-  * **[[https://www.dpreview.com/forums/thread/3941215|Normal for E-M5 mk II to sleep after 3-4 seconds in SCP?]]** +
- +
-===== Olympus E-M10 Mark II - Quick Sleep problem in viewfinder mode =====+
  
 In **live view** mode the camera will show the scene in the viewfinder (when the eye is near the viewfinder) and into the monitor (when the camera is moved away from the eye). Pressing the OK button, the **super control panel** is superimposed over the scene. In **live view** mode the camera will show the scene in the viewfinder (when the eye is near the viewfinder) and into the monitor (when the camera is moved away from the eye). Pressing the OK button, the **super control panel** is superimposed over the scene.
doc/appunti/hardware/olympus-e-m10/quick_sleep_problem_in_viewfinder_mode.txt · Last modified: 2020/10/08 16:40 by niccolo