Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:raspberrypi_micromediahub [2019/11/03 18:32] – [Kodi] niccolo
+++ doc:appunti:hardware:raspberrypi_micromediahub [2020/09/28 20:45] (current) – [Kodi] niccolo
@@ Line 9: / Line 9: @@
   * Joystick controller
   * LCD display 16x2 charaters
+====== Current consumption ======
+See **[[https://www.raspberrypi.org/documentation/faqs/#powerReqs|FAQS PowerReqs]]**.
+  * **Raspberry Pi 3 Model B**
+    * 1GB RAM
+    * Typical bare-board active current consumption: 400mA
+    * Maximum total USB peripheral current draw: 1.2A
+    * Recommended PSU current capacity: 2.5A
+  * **Raspberry Pi 3 Model A+**
+    * 512MB LPDDR2 SDRAM
+    * Typical bare-board active current consumption: 350mA
+    * Maximum total USB peripheral current draw: Limited by PSU, board, and connector ratings only.
+  * **Toshiba Canvio Basics 1Tb**
+    * USB bus power (max. 900mA)
 ====== Kodi ======