Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:tl-wr741nd [2014/02/23 23:16] – niccolo
+++ doc:appunti:hardware:tl-wr741nd [2014/02/23 23:27] – niccolo
@@ Line 6: / Line 6: @@
 ^ RAM    | 32 Mb  |
 ^ Flash  | 4 Mb  |
+===== First OpenWrt installation =====
 This is the recipe to install OpenWrt, I used trunk (BARRIER BREAKER, Bleeding Edge, r39638):
   - Reset the router to the factory defaults.
-  - Download the [[http://downloads.openwrt.org/snapshots/trunk/ar71xx/openwrt-ar71xx-generic-tl-wr741nd-v4-squashfs-factory.bin|*-factory.bin]] firmware image.
+  - Download the [[http://downloads.openwrt.org/snapshots/trunk/ar71xx/openwrt-ar71xx-generic-tl-wr741nd-v4-squashfs-factory.bin|*-factory.bin]] firmware image to a networked PC.
-  - Use the web-based procedure to upgrade the firmware, uploading the above image.
+  - Connecto to ''http://192.168.0.1/'', login with //admin// //admin// and use the web-based procedure to upgrade the firmware, uploading the above image.
-  - Connect with telenet 192.168.1.1 and set the root password.
+  - Connect with ''telenet 192.168.1.1'' and set the root password.
-  - Connect with ssh root@192.168.1.1
+  - Connect with ''ssh root@192.168.1.1''
+===== OpenWrt upgrade =====
+  - Download the [[http://downloads.openwrt.org/snapshots/trunk/ar71xx/openwrt-ar71xx-generic-tl-wr741nd-v4-squashfs-sysupgrade.bin|*-sysupgrade.bin]] firmware image into the /tmp directory of the router, rename it as ''tplink.bin''.
+  - Execute ''mtd -r write /tmp/tplink.bin firmware''.
+===== Exploring the system =====
 <code>
@@ Line 62: / Line 71: @@
   * libpcap, tcpdump-mini
-This is the free space after installing them:
+This is the **free space (84 kb)** after installing them:
 <code>