doc:appunti:hardware:alicegate_agpwi_wifi_n
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
doc:appunti:hardware:alicegate_agpwi_wifi_n [2017/12/18 16:46] – [Router Alice Gate ADSL2+ WiFi N] niccolo | doc:appunti:hardware:alicegate_agpwi_wifi_n [2018/02/05 11:26] – [Flashing TEO Alternative Firmware] niccolo | ||
---|---|---|---|
Line 3: | Line 3: | ||
{{.: | {{.: | ||
- | This is an ADSL2+ router installed by **Telecom Italia** to their customer. It ships with **crippled software** so you cannot customize even the PPPoE login or password! Here you find a recipe to substitute the firmware with something more open. | + | This is an ADSL2+ router installed by **Telecom Italia** to their customer. It ships with **crippled software** so you cannot customize even the PPPoE login and password! Here you find a recipe to substitute the firmware with something more open. Our device is labeled **ADSL2+ WiFi N**, manufactured by **ADB Broadband S.p.A.**, model name **P.DG A4001N A-000-1A1-AX**, |
- | We succeeded in flashing a new firmware | + | It has two external WiFi antennas, we succeeded in flashing a new firmware |
- | ===== The Alternative Firmware ===== | + | |
+ | ===== The Alternative Firmware | ||
+ | |||
+ | {{.: | ||
+ | {{.: | ||
We will use a firmware released by **[[wp> | We will use a firmware released by **[[wp> | ||
Line 18: | Line 22: | ||
* The **LEDs are wrong**: ADSL LED is WiFi instead, Internet LED is ADSL line. | * The **LEDs are wrong**: ADSL LED is WiFi instead, Internet LED is ADSL line. | ||
* **WDS repeater** is not working. | * **WDS repeater** is not working. | ||
+ | * **Static DHCP** lease does not work: settings are not retained. | ||
The files you have to download are: | The files you have to download are: | ||
Line 24: | Line 29: | ||
* **{{.: | * **{{.: | ||
- | ===== Flashing the Alternative | + | There are other alternative firmwares to upload on this hardware. See for example this page: **[[http:// |
+ | |||
+ | ==== Flashing the TEO Firmware ==== | ||
==== Short-Circuit Serial TX/RX to Enable the Special Upgrade Page ==== | ==== Short-Circuit Serial TX/RX to Enable the Special Upgrade Page ==== | ||
- | During normal bootstrap, if the router detects **some serial activity**, it jumps to a special mode for **Update Software**. Our model was based on **firmware AGPWI 1.1.3** , and it accepted the new firmware even if it was **not signed**. | + | {{.: |
+ | During normal bootstrap, if the router detects **some serial activity**, it jumps to a special mode for **Update Software**. Our model was based on **firmware AGPWI 1.1.3** , and it accepted the new firmware even if it is **not signed**. | ||
- | It is likely that on bootstrap there is a console on the serial line, which says something like //press a key to enter special mode//, by shorting TX and RX lines on the serial | + | It is likely that on bootstrap there is a console on the serial line, which says something like //press a key to enter special mode//, by shorting TX and RX lines on the serial |
So we have to open the router case and **short-circuit TX and RX serial line**, e.g. with a little wire or paper-clip. | So we have to open the router case and **short-circuit TX and RX serial line**, e.g. with a little wire or paper-clip. | ||
Line 91: | Line 99: | ||
* In two minutes **the router reboots** and it is ready. | * In two minutes **the router reboots** and it is ready. | ||
- | ===== Firmware | + | ===== Firmware |
- | + | ||
- | {{.: | + | |
- | {{.: | + | |
+ | {{.: | ||
===== Web Resources ===== | ===== Web Resources ===== | ||
* [[http:// | * [[http:// | ||
* [[http:// | * [[http:// | ||
+ | * [[http:// |
doc/appunti/hardware/alicegate_agpwi_wifi_n.txt · Last modified: 2018/11/18 22:17 by niccolo