doc:appunti:hardware:olympus-e-m10-mark-iv
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| doc:appunti:hardware:olympus-e-m10-mark-iv [2025/11/10 12:07] – niccolo | doc:appunti:hardware:olympus-e-m10-mark-iv [2025/11/30 15:03] (current) – [Improvements] niccolo | ||
|---|---|---|---|
| Line 2: | Line 2: | ||
| ^ Specifications | ^ Specifications | ||
| - | ^ Size and weight | + | ^ Size and weight |
| ^ Sensor Size | 17.3 mm (H) x 13.0 mm (V) | | ^ Sensor Size | 17.3 mm (H) x 13.0 mm (V) | | ||
| ^ Sensor Type | Live MOS | | ^ Sensor Type | Live MOS | | ||
| - | ^ Effective pixels | + | ^ Effective pixels |
| ^ Image processor | ^ Image processor | ||
| ^ File Format | ^ File Format | ||
| - | ^ Recording image size | + | ^ Recording image size |
| ^ Image Stabilisation | ^ Image Stabilisation | ||
| + | ^ Finder Type | Eye-level OLED viewfinder, Approx. 2.36M-dot | ||
| + | ^ Monitor Type | 3.0-inch tilting monitor (up to 180°), Approx. 1.04M dots (3:2), touch screen. | ||
| + | ^ Anti-shock Mode | ||
| + | ^ Silent Mode | ||
| ^ Release Date | August 2020 | | ^ Release Date | August 2020 | | ||
| + | ^ Battery | ||
| ===== Comparison with the Mark II model ===== | ===== Comparison with the Mark II model ===== | ||
| Line 17: | Line 22: | ||
| ==== Improvements ==== | ==== Improvements ==== | ||
| + | * **USB charging**. The camera has a **Micro-USB connector**, | ||
| + | * **Bluetooth connection**. You can configure the Bluetooth connection to remain always active, even when the camera is turned off. You can download photos to your smartphone without turning on the camera and causing the lens to initialize/ | ||
| + | * **Faster Wi-Fi**. Downloading photos over Wi-Fi has improved significantly in speed. | ||
| + | * **Erase function over Wi-Fi**. The camera supports the erase function over Wi-Fi. If your app provides that function, now you can erase photos from the app. | ||
| ==== Worsening ==== | ==== Worsening ==== | ||
| + | |||
| + | * **Cannot save MySet**. The menu items to save current settings into **MySet** **1** to **4** were removed! This is a truly **outrageous impairment** and Olympus deserves the worst punishment for doing so. | ||
| + | * **Cannot configure** the **Shortcut button** function. The function button near the On/Off lever was marked **Fn3** on the Mark II model and was highly configurable in its function. Now the button has a fixed function and it brings the appropriate menu for the current mode (e.g. the Super Control Panel). | ||
| + | * **Multi Function** button no longer exists. In the old model the **Fn2** button were associated to the Multi Function, i.e. You could assign a set of functions to this button, select the active one by pressing it and rotating the rear dial, and then activate the coosen function simply by pressing Fn2. Now four fixed functions are associated to the arrow pad: AF target, ISO sensitivity, | ||
| + | * **Case made of plastic**. The upper part of the case was made of aluminium on the Mark II model, not it is in plastic. (FIXME: Also the bottom plate?). | ||
| + | * Cannto customize **Auto Power Off** time. The default 4 hours timeout cannot be changed unlike model Mark II. | ||
| + | |||
| + | ===== The USB Charger ===== | ||
| + | |||
| + | The UBS charger provided with the E-M10 Mark IV is rated at **5 V 1.5 A**. Although the manual recommends using only the original charger, I think that it is safe to use on rated in the same way. | ||
| + | |||
| + | {{.: | ||
| + | {{.: | ||
doc/appunti/hardware/olympus-e-m10-mark-iv.1762772851.txt.gz · Last modified: by niccolo
