rigacci.org

User Tools

Site Tools

Trace:
doc:appunti:hardware:olympus-e-m10:raw_processing

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
doc:appunti:hardware:olympus-e-m10:raw_processing [2023/01/27 10:54] – [How To] niccolodoc:appunti:hardware:olympus-e-m10:raw_processing [2023/01/27 11:00] (current) – [RawTherapee] niccolo
Line 52: Line 52:
 {{ olympus-raw-control.jpg?160|}} {{ olympus-raw-control.jpg?160|}}
 RAW development performed by OM Workspace is called **PC RAW processing** because it is performed by the PC. With some Olympus cameras it is possibile to perform the so called **USB RAW processing**, i.e. the processing is performed by the camera graphic processor (generally the Olympus TruePic) via the USB cable. The camera must be turned on and switched to the **RAW/Control** mode (see the picture of the USB menu on the right). Unfortunately the E-M10 is not capable of such mode. RAW development performed by OM Workspace is called **PC RAW processing** because it is performed by the PC. With some Olympus cameras it is possibile to perform the so called **USB RAW processing**, i.e. the processing is performed by the camera graphic processor (generally the Olympus TruePic) via the USB cable. The camera must be turned on and switched to the **RAW/Control** mode (see the picture of the USB menu on the right). Unfortunately the E-M10 is not capable of such mode.
- 
-===== Darktable ===== 
- 
-FIXME 
  
 ===== RawTherapee ===== ===== RawTherapee =====
  
-The program uses a clever procedure to open a RAW image for editing: it searches for the embedded thumbnail into the RAW file and it builds a tone curve on-the-fly to match the RAW data to the jpeg. This generally will assure that the program can open a RAW picture with no specific knowledge of the camera model. Thid default behaviur is controlled by the //Preferences// => //Image Processing// => //Default Processing Profile// => //For raw photos//: **Auto-Matched Curve ISO Low**.+The program uses a clever procedure to open a RAW image for editing: it searches for the embedded thumbnail into the RAW file and **it builds a tone curve on-the-fly** to match the RAW data to the jpeg. This generally will assure that the program can open a RAW picture with no specific knowledge of the camera model. Thid default behaviur is controlled by the //Preferences// => //Image Processing// => //Default Processing Profile// => //For raw photos//: **Auto-Matched Curve ISO Low**.
  
 For the Olympus E-M10 the thumbnail embedded into a RAW file is a JPEG file with a resolution of **3200 x 2400** pixels and about **1 Mb** in size (you can extract if using the ''dcraw'' program). For the Olympus E-M10 the thumbnail embedded into a RAW file is a JPEG file with a resolution of **3200 x 2400** pixels and about **1 Mb** in size (you can extract if using the ''dcraw'' program).
Line 83: Line 79:
 {{.:rawtherapee:develop-default-in-camera.jpg?240|In-camera JPEG}} {{.:rawtherapee:develop-default-in-camera.jpg?240|In-camera JPEG}}
  
 +===== Darktable =====
 +
 +FIXME
  
 ===== dcraw ===== ===== dcraw =====
doc/appunti/hardware/olympus-e-m10/raw_processing.1674813267.txt.gz · Last modified: 2023/01/27 10:54 by niccolo