Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:raspberry_explorer [2018/10/26 10:51] – [Other Sensors] niccolo
+++ doc:appunti:hardware:raspberry_explorer [2018/11/26 09:42] (current) – [Time Syncronization with GPS and NTP] niccolo
@@ Line 48: / Line 48: @@
 {{.:raspberrypi:sensors-back.jpg?direct&500|Sensor's Back Side}}
+  * **GPS u-blox NEO-6**
+  * **GY-521: MPU-6050 Accelerometer and Gyroscope**
+  * **GY-273: QMC5883L 3-Axis Magnetic Sensor**
+  * **GYBMEP: BME280 pressure, humidity and temperature sensor**
 ===== Software Setup =====
@@ Line 275: / Line 280: @@
 </file>
-At the next reboot you should read the following kernel logs via **dmesg**:
+At the next reboot the kernel modules **pps_core** and **pps_gpio** will be loaded and you should read the following kernel logs via **dmesg**:
 <code>