Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:raspberry_x_wayland [2025/04/07 11:06] – [How to tell if X11 or Wayland is running] niccolo
+++ doc:appunti:hardware:raspberry_x_wayland [2025/04/07 12:01] (current) – niccolo
@@ Line 2: / Line 2: @@
 With the operating system **Raspbian GNU/Linux 12 (bookworm)** it is possibile to choose between the traditional **X11** graphical backend and the new **Wayland**. With X11 you can use only the **Openbox** window manager, while in Wayland you can choose **Wayfire** or the **Labwc** window manager.
+The default is **Wayland** + **Labwc** for all the Raspberry Pi models, including the Pi 2.
 Start the **raspi-config** and navigate the **Advanced Options** => **Wayland** to make your choice.
-If you are using the default **LightDM** desktop manager, the settings are saved into **/etc/lightdm/lightdm.conf**. Here are the entries for Wayland Wayfire and Labwc respectively:
+If you are using the default **LightDM** desktop manager, the settings are saved into **/etc/lightdm/lightdm.conf**. Here are the entries for Wayland Wayfire, Labwc and X11 respectively:
+=== Wayland Wayfire ===
 <file>
@@ Line 15: / Line 19: @@
 fallback-greeter=pi-greeter
 </file>
+=== Wayland Labwc ===
 <file>
@@ Line 24: / Line 30: @@
 #fallback-greeter=
 </file>
+=== X11 ===
+<file>
+greeter-session=pi-greeter
+user-session=LXDE-pi-x
+autologin-session=LXDE-pi-x
+#fallback-test=
+#fallback-session=
+#fallback-greeter=
+</file>
 ===== How to tell if X11 or Wayland is running =====
@@ Line 55: / Line 73: @@
 pi   786  3.3  7.6 287268 72252 ?   Ss   11:00   0:11 /usr/bin/labwc -m
 </code>
+===== Wayland Wayfire not starting on the Raspberry Pi 2 =====
+On the Raspberry Pi 2 the Wayland Wayfire does not start. Fortunately enough the ''raspi-config'' added into the **/etc/lightdm/lightdm.conf** configuration file the **fallback-session** option, which launches the legacy X11.
+I discovered it because I installed the **hide-cursor** Wayfire plugin, but the plugin did not work. Actually the entire Wayfire was not running!
+As per **Raspbian GNU/Linux 12 (bookworm)**, [[https://www.howtogeek.com/raspberry-pi-os-wayland-rollout/|Raspberry Pi OS Switches to Wayland on All Pi Models]], and [[https://hackaday.com/2024/10/28/raspberry-pi-oss-wayland-transition-completed-with-switch-to-labwc/|Raspberry Pi OS’s Wayland Transition Completed With Switch To Labwc]].
+Wayfire is more resource-intensive than Labwc, so its use is discouraged and it will no start on the **Raspberry Pi 2**. Infact the **/usr/bin/xfallback.sh** script will return zero if run on the Pi 2.
 ===== Starting the Wayland backend manually =====