Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:raspberrypi_air [2018/10/03 06:00] – [Basic Raspbian Setup] niccolo
+++ doc:appunti:hardware:raspberrypi_air [2020/08/14 10:17] (current) – [Rapsberry Pi Air Quality Station] niccolo
@@ Line 1: / Line 1: @@
-====== Rapsberry Pi Air Quality Station ======
+====== Raspberry Pi Air Quality Station ======
 This is my second approach to the **[[wp>Internet of things]]**, this time I built a **weather station** to be installed on the balcony. The first one, which was based also on the [[wp>Raspberry Pi]], was a [[raspberrypi_thermostat|programmable thermostat]].
@@ Line 80: / Line 80: @@
 </code>
-Edit **/etc/nginx/sites-available/default** to enable PHP into the Nginx web server, then reload Nginx. We want also that Nginx write log messages into memory instead of microSD files (we are running busybox-syslogd), so we changed the file **/etc/nginx/nginx.conf** in this way:
+Edit **/etc/nginx/sites-available/default** to enable PHP into the Nginx web server, then reload Nginx.
-<file>
-http {
-    #access_log /var/log/nginx/access.log;
-    #error_log /var/log/nginx/error.log;
-    access_log syslog:server=unix:/dev/log;
-    error_log syslog:server=unix:/dev/log;
-}
-</file>
 ===== DS3231 RTC Clock =====