doc:appunti:hardware:raspberrypi_nas_networking
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |||
doc:appunti:hardware:raspberrypi_nas_networking [2021/04/02 15:18] – [Hard disk performance] niccolo | doc:appunti:hardware:raspberrypi_nas_networking [2021/04/02 15:19] (current) – [Hard disk performance] niccolo | ||
---|---|---|---|
Line 32: | Line 32: | ||
| USB 3.0 | 184.8 | | | USB 3.0 | 184.8 | | ||
- | If you are interested in transferring large files across the network, beware that a **100 Mbit LAN** imposes a limit of **14.7 Mb per second**, so the **USB 2** interface is enough to sustain that. But if you are interested into **Gbit Ethernet** performance offered by the Raspberry Pi 4, you definitely need to use the **USB 3.0** interface. | + | If you are interested in transferring large files across the network, beware that a **100 Mbit LAN** imposes a limit of **14.7 Mb per second**, so the **USB 2** interface is enough to sustain that. But if you are interested into **Gigabit |
doc/appunti/hardware/raspberrypi_nas_networking.1617369523.txt.gz · Last modified: 2021/04/02 15:18 by niccolo