Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:raspberrypi_nas_remote_control [2021/04/24 19:45] – [Configuring the gamepad in Kodi] niccolo
+++ doc:appunti:hardware:raspberrypi_nas_remote_control [2021/04/24 19:59] (current) – [Working kernel versions] niccolo
@@ Line 38: / Line 38: @@
 The gamepad goes to stand-by after some time of non-use. To wake it up it is necessary to press the **start** button; the red LED turns on and the gamepad is working.
+===== Problem: non working left and right arrows =====
+Everything is working correctly with a **Raspberry Pi 3**, using RaspiOS based on **Debian 9.11 Stretch** and **Kodi 17.6**. There is instead a problem with a **Raspberry Pi 4**, using RaspiOS based on **Debian 10.8** and **Kodi 18.7**: the **Left** and **Right** arrow keys do not work.
+Someone had the same problem using Retropie: **[[https://retropie.org.uk/forum/topic/25657/controler-issue-no-left-and-right-not-working-at-all/| Controler Issue (no left and right not working at all)]]**.
+==== Working kernel versions ====
+^ System                ^ Kernel             ^  ABS_X Working  ^
+| Raspberry Pi 3        | 4.19.66-v7+        | Yes  |
+| Raspberry Pi 4        | 5.10.11-v7l+       | No   |
+| PC amd64 Debian 10.8  | 4.9.189-3+deb9u2   | Yes  |
+| PC amd64 Debian 10.8  | 4.19.67-2+deb10u2  | Yes  |
+| PC amd64 Debian 10.8  | 4.19.98-1+deb10u1  | No   |
+| PC amd64 Debian 10.8  | 4.19.160-2         | No   |
 ===== Web References =====