Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:sjcam-8pro-ambarella-firmware-modding [2022/06/15 16:34] – [White balance presets] niccolo
+++ doc:appunti:hardware:sjcam-8pro-ambarella-firmware-modding [2022/06/15 16:47] (current) – [White balance presets] niccolo
@@ Line 434: / Line 434: @@
 {{.:ambarella:bitrateeditor-wb-presets.png?direct&640|}}
-White balance is probably applied as a series of linear transformations to the **four raw values** captured by te [wp>Bayer_filter|Bayer filter sensor]]**. The four channels are **Red**, **Green-on-red**, **Blue** and **Green-on-blue**, each transformation consists of a multiplier coefficient (slope) and an offset.
+FIXME: It is not know how this table works. It seems that labels are wrong: **YA_min** and **YB_min** are repeated twice, may be they are **YA_max** and **YB_max**.
+White balance is probably applied as a series of linear transformations to the **four raw values** captured by te **[[wp>Bayer_filter|Bayer filter sensor]]**. The four channels are **Red**, **Green-on-red**, **Blue** and **Green-on-blue**, each transformation consists of a multiplier coefficient (slope) and an offset.
 ^ Gr  | Green on Red  |
 ^ Gb  | Green on Blue  |
-^ Ya  | Y value of target image?  |
+^ Ya  | Y channel value of target image?  |
-^ Yb  | Y value of reference image?  |
+^ Yb  | Y channel value of reference image?  |
 ===== 3D LUT tables =====