User Tools

Site Tools


doc:appunti:hardware:tl-wr741nd

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
doc:appunti:hardware:tl-wr741nd [2014/02/23 23:11]
niccolo
doc:appunti:hardware:tl-wr741nd [2014/02/24 09:33] (current)
niccolo [TP-LINK TL-WR741ND]
Line 4: Line 4:
  
 ^ CPU    | Atheros AR9330 ​ | ^ CPU    | Atheros AR9330 ​ |
-^ RAM    |  32 Mb | +^ RAM    | 32 Mb  
-^ Flash  |   ​4 Mb |+^ Flash  | 4 Mb  | 
 + 
 +  * [[http://​wiki.openwrt.org/​toh/​tp-link/​tl-wr741nd|OpenWrt wiki]] 
 +  * [[http://​downloads.openwrt.org/​snapshots/​trunk/​ar71xx/​|Download OpenWrt for ar71xx Trunk]] 
 +===== First OpenWrt installation =====
  
 This is the recipe to install OpenWrt, I used trunk (BARRIER BREAKER, Bleeding Edge, r39638): This is the recipe to install OpenWrt, I used trunk (BARRIER BREAKER, Bleeding Edge, r39638):
  
-  - Factory reset the router +  - Reset the router ​to the factory defaults. 
-  - Download the [[http://​downloads.openwrt.org/​snapshots/​trunk/​ar71xx/​openwrt-ar71xx-generic-tl-wr741nd-v4-squashfs-factory.bin|*-factory.bin]] firmware image. +  - Download the [[http://​downloads.openwrt.org/​snapshots/​trunk/​ar71xx/​openwrt-ar71xx-generic-tl-wr741nd-v4-squashfs-factory.bin|*-factory.bin]] firmware image to a networked PC
-  - Use the original ​web-based procedure to upgrade the firmware, ​upload ​the above image. +  - Connecto to ''​http://​192.168.0.1/'',​ login with //admin// //admin// and use the web-based procedure to upgrade the firmware, ​uploading ​the above image. 
-  - Connect with telenet 192.168.1.1 and set the root password. +  - Connect with ''​telenet 192.168.1.1'' ​and set the root password. 
-  - Connect with ssh root@192.168.1.1+  - Connect with ''​ssh root@192.168.1.1''​ 
 + 
 +===== OpenWrt upgrade ===== 
 + 
 +  - Download the [[http://​downloads.openwrt.org/​snapshots/​trunk/​ar71xx/​openwrt-ar71xx-generic-tl-wr741nd-v4-squashfs-sysupgrade.bin|*-sysupgrade.bin]] firmware image into the /tmp directory of the router, rename it as ''​tplink.bin''​. 
 +  - Execute ''​mtd -r write /​tmp/​tplink.bin firmware''​. 
 + 
 +===== Exploring the system =====
  
 <​code>​ <​code>​
Line 55: Line 66:
 </​code>​ </​code>​
  
-We installed the following ​extra packages:+We need OpenVPN and some other extra packages. Due low flash space we opted for libpolarssl SSL implementation,​ there is not enough space for the LuCI web interface:
  
   * coreutils, coreutils-base64   * coreutils, coreutils-base64
Line 62: Line 73:
   * libpcap, tcpdump-mini   * libpcap, tcpdump-mini
  
-This is the free space after installing them: +This is the **free space (84 kb)** after installing them: 
  
 <​code>​ <​code>​
doc/appunti/hardware/tl-wr741nd.1393193507.txt.gz · Last modified: 2014/02/23 23:11 by niccolo