Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:tv_lg_32lq63006la [2025/06/19 14:55] – [Slideshow] niccolo
+++ doc:appunti:hardware:tv_lg_32lq63006la [2025/06/20 12:34] (current) – [CEC] niccolo
@@ Line 16: / Line 16: @@
     * Power On Screen => Recent Input
+===== Three Times Mute Hidden Menu =====
-===== Auto Update =====
+  * **Auto Power Sync** - When enabled, turning on a SIMPLINK-linked device will also turn on the TV, and conversely, turning off the TV will turn off the connected devices.
+  * **Screen Saver** - This is not the image slideshow on the //No Signal// state, the slideshow starts even if this option is disabled.
+  * **Show LG Logo when turning off the TV**
-Settings => Support => Software Update => Auto Update
+===== Power Off Timer =====
-===== Three Times Mute Hidden Menu =====
+  * All Settings => General => System => Time & Timer => Timers => Auto Power Off After 4 Hours
+===== Energy Saving =====
-===== Power Off Timer =====
+  * All Settings => General => Energy Saving => Auto Power Off => 2 Hours
-  * All Settings => General => System => Time & Timer => Timers => Auto Power Off After 4 Hours
+===== Slideshow on No Signal =====
-===== Slideshow =====
+It is not possibile to disable the image slideshow when entering the **No Signal** state (e.g. on HDMI input with no signal on the cable). After 15 minutes of no signal, the TV does a **power off**; it is not possibile to modifiy the 15 minutes wait time.
-Generale => Impostazioni aggiuntive => Impostazioni Home
-Preferenze dispositivo => Screensaver
+===== Auto Update =====
-===== Poweroff on No Signal =====
+  * All Settings => Support => Software Update => Auto Update
 ===== CEC =====
-FIXME Intel NUC BIOS Setup Go to Advanced > Devices > Onboard Devices. In the Legacy Device Configuration pane, enable HDMI CEC Control.
+  * All Settings => General => Devices => HDMI Settings => SIMPLINK (HDMI-CEC)
+===== Intel Mini PC does not support CEC =====
+The BMAX Mini PC Gemini Lake N4000 does not seems to support the CEC protocol. No mention of CEC function in BIOS and **cec-client** does not detect a device:
+<code>
+cec-client -l
+libCEC version: 6.0.2, compiled on Linux ... , features: P8_USB, DRM, P8_detect, randr, Exynos, Linux, AOCEC
+Found devices: NONE
+</code>
 <code>
@@ Line 48: / Line 61: @@
 dmidecode -s bios-release-date
 /14/2024
-</code>
-<code>
-cec-client -l
-libCEC version: 6.0.2, compiled on Linux ... , features: P8_USB, DRM, P8_detect, randr, Exynos, Linux, AOCEC
-Found devices: NONE
 </code>