Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:tv_lg_32lq63006la [2025/06/19 15:28] – niccolo
+++ doc:appunti:hardware:tv_lg_32lq63006la [2025/06/20 12:34] (current) – [CEC] niccolo
@@ Line 20: / Line 20: @@
   * **Auto Power Sync** - When enabled, turning on a SIMPLINK-linked device will also turn on the TV, and conversely, turning off the TV will turn off the connected devices.
-  * **Screen Saver**
+  * **Screen Saver** - This is not the image slideshow on the //No Signal// state, the slideshow starts even if this option is disabled.
   * **Show LG Logo when turning off the TV**
@@ Line 33: / Line 33: @@
 ===== Slideshow on No Signal =====
-Cannot disable the slideshow when entering the **No Signal** state. Does the TV turns itself off? FIXME
+It is not possibile to disable the image slideshow when entering the **No Signal** state (e.g. on HDMI input with no signal on the cable). After 15 minutes of no signal, the TV does a **power off**; it is not possibile to modifiy the 15 minutes wait time.
 ===== Auto Update =====
@@ Line 43: / Line 44: @@
   * All Settings => General => Devices => HDMI Settings => SIMPLINK (HDMI-CEC)
-The BMAX Mini PC Gemini Lake N4000 seems that does not support CEC. No mention of CEC function in BIOS and **cec-client** does not detect a device:
+===== Intel Mini PC does not support CEC =====
+The BMAX Mini PC Gemini Lake N4000 does not seems to support the CEC protocol. No mention of CEC function in BIOS and **cec-client** does not detect a device:
 <code>