Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:ups_apc [2022/10/27 19:37] – [Using APC UPS on Debian GNU/Linux] niccolo
+++ doc:appunti:hardware:ups_apc [2022/11/02 17:39] – [APC Back-UPS CS 500] niccolo
@@ Line 225: / Line 225: @@
 </code>
-The two most important functions are the **#10 battery calibration** and the **#12 self-test interval**. Battery calibration must be initiated with a fully charged battery and the normal load (it should be above 10%); it will end when battery drops below about 25%. Unfortunately it seems that the **Back-UPS CS 500** model does not support the **periodic self-test**, chosing option #12 results always in self-test interval: **None**.
+The two most important functions are the **#10 battery calibration** and the **#12 self-test interval**. Battery calibration must be initiated with a fully charged battery and the normal load (it should be above 10%); it will end when battery drops below about 25%.
+Unfortunately it seems that the **Back-UPS CS 500** model does not support the configuration of the **periodic self-test**, chosing option #12 results always in self-test interval **//None//**. However I asked the APC support about the self-test on model CS 500: a technician answered me in a few days, saying that that model **does a self test** on **power-on** and once **every two weeks**.
 ^ New battery date (MM/DD/YYYY)  |