Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:ups_apc_nut [2026/10/02 14:57] – niccolo
+++ doc:appunti:hardware:ups_apc_nut [2026/10/02 16:44] (current) – [Configuration] niccolo
@@ Line 1: / Line 1: @@
 ====== Using an APC UPS with the Nut software ======
+===== Configuration =====
+Configuration files into **/etc/nut/** directory:
+  * **nut.conf**
+  * **ups.conf**
+  * **upsd.conf**
+  * **upsd.users**
+  * **upsmon.conf**
+=== /etc/nut/nut.conf ===
+<file>
+MODE=standalone
+</file>
+=== /etc/nut/ups.conf ===
+<file>
+[apc-bx2200]
+    driver = usbhid-ups
+    port = auto
+    #serial = "9B2611A02967"
+    desc = "APC Back-UPS BX2200MI"
+    ignorelb
+    pollonly
+</file>
+=== /etc/nut/upsd.conf ===
+<file>
+LISTEN 127.0.0.1 3493
+LISTEN 192.168.0.46 3493
+</file>
+=== /etc/nut/ ===
+<file>
+[admin]
+    password = MySecret1
+    actions = SET
+    instcmds = ALL
+[monuser]
+    password = MySecret2
+    upsmon master
+</file>
+=== /etc/nut/upsmon.conf ===
+<file>
+MONITOR apc-bx2200@localhost 1 monuser MySecret2 master
+</file>
+===== Usage =====
 List the UPS configured with nut:
@@ Line 19: / Line 75: @@
 upsc apc-bx2200 ups.status
 upsc apc-bx2200 battery.charge
+upsc apc-bx2200 battery.runtime
 upsc apc-bx2200 ups.alarm
 upsc apc-bx2200 ups.load