Differences

This shows you the differences between two versions of the page.

--- doc:appunti:linux:sa:cryptfs [2017/11/07 12:36] – [Using a key-file instead of an interactive password] niccolo
+++ doc:appunti:linux:sa:cryptfs [2019/04/24 17:22] – [enc-fs] niccolo
@@ Line 166: / Line 166: @@
 Per montare nuovamente la directory si usa lo stesso comando **''encfs''** utilizzato per inizializzare la directory.
+È possibile **modificare la password**; si tratta in realtà della **password che protegge la chiave di cifratura** vera e propria, pertanto non sarà necessario cifrare nuovamente tutto il contenuto. Si usa il comando:
+<code>
+encfsctl passwd ~/encfs/.crypt
+</code>
 ==== Reverse enc-fs ====
@@ Line 285: / Line 290: @@
 Starting with **Debian 6 Squeeze** the **noauto** parameter is still required. Once the system is running you can execute the command **/etc/init.d/cryptdisks force-start** to start the encrypted disk, asking for the password.
-Starting with **Debian 9 Stretch** the **noauto** parameter is used as usual, but //sysvinit// init system was superceeded by **systemd**, so the script ''/etc/init.d/cryptdisks'' is no longer used. To start the encrypted disk interactively you should use the script **cryptdisks_start** instead.
+Starting with **Debian 9 Stretch** the **noauto** parameter is used as usual, but //sysvinit// init system was superceeded by **systemd**, so the script ''/etc/init.d/cryptdisks'' is no longer used. To start the encrypted disk interactively you should use the script **cryptdisks_start** instead, e.g.:
+<code>
+cryptdisks_start dm0
+</code>