Differences

This shows you the differences between two versions of the page.

--- doc:appunti:linux:sa:raid [2022/06/21 13:03] – [Rename a device] niccolo
+++ doc:appunti:linux:sa:raid [2024/04/17 12:44] (current) – [Gestione RAID con mdadm] niccolo
@@ Line 50: / Line 50: @@
 mdadm --manage /dev/md0 --fail /dev/sdb2
 mdadm --manage /dev/md0 --remove /dev/sdb2
+</code>
+=== Distruggere un volume RAID ===
+Per eliminare definitivamente un volume raid è necessario fermarlo, quindi è opportuno azzerare il sperblock di ogni componente, per evitare che l'auto-run dei volumi trovi la signature nelle partizioni e provveda a fare l'assemblaggio al successivo reboot:
+<code>
+mdadm --stop /dev/md4
+mdadm --zero-superblock /dev/sda7
+mdadm --zero-superblock /dev/sdb7
 </code>
@@ Line 185: / Line 195: @@
 ==== Rename an MD device permanently ====
-To geneate the configuration file **/etc/mdadm/mdadm.conf** you can use the tool **/usr/share/mdadm/mkconf**, which gathers information from the existing RAID volumes. The information are read from the **superblock** of the MD arrays and contains the **name** and **homehost**, so the file created is something like this:
+To geneate the configuration file **/etc/mdadm/mdadm.conf** you can use the tool **/usr/share/mdadm/mkconf**, which gathers information from the existing RAID volumes. The information are read from the **superblock** of the MD arrays and contains the **name** and **homehost**, so the file created contains lines like this:
 <file>