Differences

This shows you the differences between two versions of the page.

--- tecnica:meccanica:vector_welding_mig_130 [2025/03/12 16:48] – [Current (ampere)] niccolo
+++ tecnica:meccanica:vector_welding_mig_130 [2025/03/12 17:08] (current) – [Web references] niccolo
@@ Line 580: / Line 580: @@
 {{.:vector_welding:example-weld-diagrams.png?direct&640|Example weld diagrams}}
-==== Current (ampere) ====
+==== Current (ampere) faults ====
-{{.:vector_welding:current-faults-large.jpg?direct&276|}}
+{{.:vector_welding:current-faults-large.jpg?direct&276|Current faults}}
-{{.:vector_welding:current-faults-section-large.jpg?direct&462|}}
+{{.:vector_welding:current-faults-section-large.jpg?direct&462|Current faults (section)}}
-==== Voltage (arc lenght) ====
+==== Voltage (arc lenght) faults ====
-{{.:vector_welding:arc-length-faults-large.jpg?direct&320|}}
+{{.:vector_welding:arc-length-faults-large.jpg?direct&276|Voltage faults}}
-{{.:vector_welding:arc-length-faults-section-large.jpg?direct&380|}}
+{{.:vector_welding:arc-length-faults-section-large.jpg?direct&462|Voltage faults (section)}}
-==== Travel speed ====
+==== Travel speed faults ====
-{{.:vector_welding:speed-faults-large.jpg?direct&320|}}
+{{.:vector_welding:speed-faults-large.jpg?direct&252|Travel speed faults}}
-{{.:vector_welding:speed-faults-section-large.jpg?direct&380|}}
+{{.:vector_welding:speed-faults-section-large.jpg?direct&479|Travel speed faults (section)}}
 ===== 4.6 Consumables =====
   * **Wire spool size**: 16 x 100 mm diameter (inner x outer) x 44 mm.
+  * **Wire type**: The most common designations are **E71T-11** and **E71T-GS**. The //-11// is a wire for all positions and multi-pass welding while the //-GS// is a //general standard// usually suited for a single pass welding.
   * **Contact tip**: the tip has an M6 thread x 25 mm lenght. The torch consumables (tip and nozzle) should be compatible with the //Binzel standard// MIG torches **MB15**, also labeled as **AK15** by other manufacturers.
   * **Nozle**: 12 mm inner diameter, 52 mm lenght.
@@ Line 669: / Line 670: @@
   * **[[https://tooliom.com/blogs/tooliom/classification-of-flux-cored-arc-welding-fcaw-wires|Classification of Flux-Cored Arc Welding (FCAW) Wires]]**
   * **[[https://www.mig-welding.co.uk/arc-welding-faults.htm|Arc Welding Faults]]**
+  * **[[https://welditmyself.com/e71t-11-vs-e71t-gs/|E71T-11 vs E71T-GS When you’re worried about making the wrong choice]]**