Differences

This shows you the differences between two versions of the page.

--- tecnica:meccanica:vector_welding_mig_130 [2025/03/12 17:05] – [4.6 Consumables] niccolo
+++ tecnica:meccanica:vector_welding_mig_130 [2025/03/12 17:08] (current) – [Web references] niccolo
@@ Line 598: / Line 598: @@
   * **Wire spool size**: 16 x 100 mm diameter (inner x outer) x 44 mm.
-  * **Wire type**: The most common designation are **E71T-11** and **E71T-GS**. The //-11// is a wire for all positions and multi-pass welding while the //-GS// is a //general standard// usually suited for a single pass welding.
+  * **Wire type**: The most common designations are **E71T-11** and **E71T-GS**. The //-11// is a wire for all positions and multi-pass welding while the //-GS// is a //general standard// usually suited for a single pass welding.
   * **Contact tip**: the tip has an M6 thread x 25 mm lenght. The torch consumables (tip and nozzle) should be compatible with the //Binzel standard// MIG torches **MB15**, also labeled as **AK15** by other manufacturers.
   * **Nozle**: 12 mm inner diameter, 52 mm lenght.
@@ Line 670: / Line 670: @@
   * **[[https://tooliom.com/blogs/tooliom/classification-of-flux-cored-arc-welding-fcaw-wires|Classification of Flux-Cored Arc Welding (FCAW) Wires]]**
   * **[[https://www.mig-welding.co.uk/arc-welding-faults.htm|Arc Welding Faults]]**
+  * **[[https://welditmyself.com/e71t-11-vs-e71t-gs/|E71T-11 vs E71T-GS When you’re worried about making the wrong choice]]**