Differences

This shows you the differences between two versions of the page.

--- tecnica:motori:honda_ntv650_carburetor [2025/12/19 10:18] – [Web References] niccolo
+++ tecnica:motori:honda_ntv650_carburetor [2025/12/19 13:08] (current) – [Repair kits] niccolo
@@ Line 78: / Line 78: @@
 You can find several carburator **repair kits** on the net, many of them are no-branded, mainly Chinese production. What you want to replace mostly will be the **float chamber gasket** and the **valve needle**, whose rubber may have hardened and deformed. It is nice if the kit contains also the other o-rings.
-I found that several kits have low quality and/or low design parts, especially the float chamber gasket may be too thin or does not perfectly fit the cave. A nice exception is the kit from **Keyster**, a Japanese company specializing in carburetor restoration kits. I purchased the **KH-1348 kit** specifically produced for the Honda NTV650 Revere 1988-1990. The kit contains FIXME
+{{ .:honda_ntv650:kh-1348-box-back.jpg?120|Keyster KH-1348 kit}}
+{{ .:honda_ntv650:kh-1348-box-front.jpg?120|Keyster KH-1348 kit}}
+I found that several kits have low quality and/or low design parts, especially the float chamber gasket may be too thin or does not perfectly fit the cave. A nice exception is the kit from **Keyster**, a Japanese company specializing in carburetor restoration kits. I purchased the **KH-1348 kit** specifically produced for the Honda NTV650 Revere 1988-1990 and it turned out to be of **excellent quality**. The kit contains:
+  * 2 x Gasket chamber
+  * 2 x Valve seat with washer, filter and needle
+  * 2 x Screw air with spring, O-ring and washer
+  * 2 x Drain screw with O-ring
+  * 1 x Jet main #140
+  * 1 x Jet main #135
+  * 2 x Jet slow #42
+{{.:honda_ntv650:kh-1348-content.jpg?200|KH-1348 Kit Contents}}
+The kit **does not contain** the stem holding the main jet nor the little oval gasket of the air cut-off valve, but I was **particularly pleased with the float chamber gasket**: the shape and size are perfectly similar to the original.
+It seems that also the Keyster kit **K-976EK** is compatibile with the NTV650 Revere, it contains fewer parts, but it contains the same rubber parts as the **KH-1348** kit, plus the oval O-ring of the air cut-off valve. Another kit from Keyster is the **K139** (also labeled **NTMOR-007G**), which includes only the float chamber gasket.
 ===== Web References =====