Differences

This shows you the differences between two versions of the page.

--- tecnica:motori:honda_ntv650_carburetor [2025/12/19 10:41] – [Repair kits] niccolo
+++ tecnica:motori:honda_ntv650_carburetor [2025/12/19 13:08] (current) – [Repair kits] niccolo
@@ Line 83: / Line 83: @@
   * 2 x Gasket chamber
-  * 2 x Needle vale
+  * 2 x Valve seat with washer, filter and needle
-  * 2 x Screw air
+  * 2 x Screw air with spring, O-ring and washer
-  * 2 x Spring air
+  * 2 x Drain screw with O-ring
   * 1 x Jet main #140
   * 1 x Jet main #135
   * 2 x Jet slow #42
-  * 2 x O-ring
+{{.:honda_ntv650:kh-1348-content.jpg?200|KH-1348 Kit Contents}}
-  * 2 x Washer
+The kit **does not contain** the stem holding the main jet nor the little oval gasket of the air cut-off valve, but I was **particularly pleased with the float chamber gasket**: the shape and size are perfectly similar to the original.
+It seems that also the Keyster kit **K-976EK** is compatibile with the NTV650 Revere, it contains fewer parts, but it contains the same rubber parts as the **KH-1348** kit, plus the oval O-ring of the air cut-off valve. Another kit from Keyster is the **K139** (also labeled **NTMOR-007G**), which includes only the float chamber gasket.
-The kit **does not contain** the stem holding the main jet nor the little oval gasket of the air cut-off valve.
 ===== Web References =====