Differences

This shows you the differences between two versions of the page.

--- tecnica:motori:honda_ntv650_custom_parts [2025/04/10 10:45] – niccolo
+++ tecnica:motori:honda_ntv650_custom_parts [2025/04/10 10:47] (current) – niccolo
@@ Line 1: / Line 1: @@
 ====== Honda NTV650 Revere - Custom parts ======
-===== Harness for 12 v power supply =====
+  * **[[honda_ntv650_custom_harness_12v_pwer_supply]]**
-I made the following harness to draw 12 v from the battery for my GPS or for recharging the smartphone. The connector is useful also to connect a battery charge mantainer during periods of long non-use.
-The **10 A fuse** (a regular ATO/ATC blade fuse) is mounted on two **faston connectors**. The output is a **180923-0 TE Connectivity** 2 way female unsealed faston connector. The fuse blades are 5.3 mm wide, but we neverthless used  two **6.3 mm** faston female connectors (The connector has been slightly squeezed to obtain a more solid connection). The 180923-0 connector accepts **6.3 mm** faston female connectors, with the locking lance.
-The eyelet terminals connect directly to the battery, the connector is reachable near the main beam of the motorcycle frame, on the left side.
-{{.:honda_ntv650:12v-supply-harness.jpg?400|}}
-^ Wires lenght  ^^
-^ Black      | 830 mm  |
-^ Red        | 690 mm  |
-^ Red short  | 140 mm  |
   * **[[honda_ntv650_custom_smartphonegps_holder]]**