Differences

This shows you the differences between two versions of the page.

--- tecnica:motori:honda_ntv650_wiring_diagram [2025/09/02 09:29] – [Harness wires gauge] niccolo
+++ tecnica:motori:honda_ntv650_wiring_diagram [2025/09/07 17:52] (current) – [Connectors] niccolo
@@ Line 21: / Line 21: @@
 | Thick   |  2.65 mm |     |          |           |               |
-The AWG gauge is calculated measuring the diameter of the single strand and calculating the cross-sectional area; then the nearest value is looked into the [[wp>American_wire_gauge|AWG gauge table]].
+The outer diameter refers to the overall cable, including the insulator. The AWG gauge is calculated measuring the diameter of the single strand and calculating the overall cross-sectional area; then the nearest value is looked into the [[wp>American_wire_gauge|AWG gauge table]].
+===== Connectors =====
+The **mini connectors** used into the wiring harness are the **MTW Sumitomo** unsealed series, with **2.8 mm** terminals. Here are the part numbers:
+^  Sumitomo MTW series  ^^
+^ 6040-2111  | Housing Female, 2P  |
+^ 6030-2981  | Housing Male, 2P    |
+^ 6040-3111  | Housing Female, 3P  |
+^ 6030-3991  | Housing Male, 3P    |
+^ 6040-4111  | Housing Female, 4P  |
+^ 6030-4991  | Housing Male, 4P    |
+^ 6040-9111  | Housing Female, 9P  |
+^ 6030-9991  | Housing Male, 9P    |
+^ 1500-0071  | Male terminal 2.8 mm  |
+^ 8240-4050  | Female terminal 2.8 mm  |
 ===== Fuel pump connector polarity =====