Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:gopro_sharpness [2025/05/27 10:58] – created niccolo
+++ doc:appunti:hardware:gopro_sharpness [2025/05/28 12:00] (current) – [GoPro Hero 10 sharpness settings] niccolo
@@ Line 1: / Line 1: @@
-====== GoPro Hero 10 sharpness setting ======
+====== GoPro Hero 10 sharpness settings ======
+The **GoPro Hero 10** camera has three different settings for sharpness. Here there are the **details enlarged by 200%** of three frames captured with the three different sharpness settings. I think that the **default medium** setting is the way to go.
+===== High =====
+The **sharpness** filter at the **high setting** produces a **bright halo** around **dark details** and a **dark halo** around **light details** in the image, as you can see around the antenna on the rooftop of the car:
+{{.:gopro-hero-10:gopro10_sharpness-high.jpg?480|}}
+===== Medium (default) =====
+At the **medium setting**, which is the default, the **halo** produced by the software filter is still noticeable (at 200% enlargment), but not so marked:
+{{.:gopro-hero-10:gopro10_sharpness-medium.jpg?480|}}
+===== Low =====
+At the **low setting** the artifical halo is practically absent and the visual effect at 100% enlargement is a bit blurry. You may want to use this setting for a face closeup to hide the **skin imperfections** or if you intend to apply a sharpness filter on **post production**:
+{{.:gopro-hero-10:gopro10_sharpness-low.jpg?480|}}
+===== The full frames =====
+{{.:gopro-hero-10:gopro10_sharpness-high-full-frame.jpg?200|GoPro Hero 10 frame High Sharpness}}
+{{.:gopro-hero-10:gopro10_sharpness-medium-full-frame.jpg?200|GoPro Hero 10 frame Medium Sharpness}}
+{{.:gopro-hero-10:gopro10_sharpness-low-full-frame.jpg?200|GoPro Hero 10 frame Low Sharpness}}