User Tools

Site Tools


doc:appunti:hardware:olympus-e-m10:pergear_fisheye

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
doc:appunti:hardware:olympus-e-m10:pergear_fisheye [2022/12/15 18:22] – [Nitidezza dal centro ai bordi] niccolodoc:appunti:hardware:olympus-e-m10:pergear_fisheye [2022/12/20 09:40] (current) – [Lens-flare] niccolo
Line 1: Line 1:
 ====== The Pergear 7.5mm F2.8 Fish-Eye ====== ====== The Pergear 7.5mm F2.8 Fish-Eye ======
  
-**fish-eye manual lens on the Olympus E-M10 Mark II**+**Obiettivo manuale fish-eye su Olympus E-M10 Mark II** 
 + 
 +^ Specifications  ^^ 
 +| Focal length         | 7.5 mm           | 
 +| Angle of view        | 130° (on MFT)    | 
 +| Aperture range       | f/2.8 - f/22     | 
 +| Focus range          | 12 cm - ∞        | 
 +| External dimensions  | ø 61 mm x 54 mm  | 
 +| Weight (excluding caps and hoods)  | 320 g  | 
 + 
 +The specifications above are provided by the manufacturer and are quite approximative; checking with the various on-line field-of-view calculators (you can try this one at [[https://www.scantips.com/lights/fieldofview.html|www.scantips.com]]), the angle of view for a 7.5 mm lens on a Micro Four Thirds sensor should be 98.15°. I made some measures on the field and it turned out that the actual **horizontal field of view** is about **107°** which, on a Micro Four Thirds system, is equivalent to a lens of **6.5 mm** focal lenght. 
  
 ===== Nitidezza dal centro ai bordi ===== ===== Nitidezza dal centro ai bordi =====
Line 9: Line 20:
 Dalle prove che ho fatto risulta che la perdita di nitidezza è causata da due fattori. Il primo è dovuto effettivamente dall'ottica delle lenti e non è attenuabile in alcun modo se non riducendo l'apertura del diaframma. L'**effetto //blur// è ben visibile a f/2.8**, risulta a mio avviso **accettabile a f/8** ed è decisamente **lieve a f/11**: Dalle prove che ho fatto risulta che la perdita di nitidezza è causata da due fattori. Il primo è dovuto effettivamente dall'ottica delle lenti e non è attenuabile in alcun modo se non riducendo l'apertura del diaframma. L'**effetto //blur// è ben visibile a f/2.8**, risulta a mio avviso **accettabile a f/8** ed è decisamente **lieve a f/11**:
  
-{{pergear-f02.8.jpg?direct&200|f/2.8}} +{{pergear-f02.8.jpg?direct&220|f/2.8}} 
-{{pergear-f08.0.jpg?direct&200|f/8}} +{{pergear-f08.0.jpg?direct&220|f/8}} 
-{{pergear-f11.0.jpg?direct&200|f/11}}+{{pergear-f11.0.jpg?direct&220|f/11}}
  
 Nei due dettagli che seguono si nota che non vi è molta differenza di nitidezza mettendo a fuoco **il centro del fotogramma** sia a **f/2.8** che a **f/8.0**: Nei due dettagli che seguono si nota che non vi è molta differenza di nitidezza mettendo a fuoco **il centro del fotogramma** sia a **f/2.8** che a **f/8.0**:
Line 34: Line 45:
 {{pergear-sun-flares.jpg?360|Lens-flare ed effetto stella contro sole}} {{pergear-sun-flares.jpg?360|Lens-flare ed effetto stella contro sole}}
 {{pergear-light-flares.jpg?360|Lens-flare ed effetto stella con faretto alogeno}} {{pergear-light-flares.jpg?360|Lens-flare ed effetto stella con faretto alogeno}}
 +
 +===== Aberrazione cromatica =====
 +
 +Una lente in generale può essere affetta da due tipi di [[wp>Chromatic_aberration|aberrazione cromatica]], assiale e laterale (o trasversale):
 +
 +  * **Axial chromatic aberration**: different wavelengths of light are focused at different distances from the lens.
 +    * Typical at long focal lengths.
 +    * Occurs throughout the image.
 +    * It is reduced by stopping down (due the augmented depth of field).
 +    * Difficult to remedy in post-processing.
 +  * **Transverse chromatic aberration**: different wavelengths are focused at different positions in the focal plane.
 +    * Typical at short focal lengths.
 +    * Increases towards the edge.
 +    * Tt is not affected by stopping down.
 +    * Can be corrected by radially scaling the RGB planes appropriately so they line up.
 +
 +FIXME: Vediamo quanto incide l'aberrazione cromatica laterale e quanto è possibile correggerla in postproduzione.
 +
  
 ===== Third party lens manufacturer ===== ===== Third party lens manufacturer =====
doc/appunti/hardware/olympus-e-m10/pergear_fisheye.1671124940.txt.gz · Last modified: 2022/12/15 18:22 by niccolo