User Tools

Site Tools


doc:appunti:hardware:qnap_ts-120

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
doc:appunti:hardware:qnap_ts-120 [2025/04/01 12:35] – [Cooling Fan] niccolodoc:appunti:hardware:qnap_ts-120 [2025/04/01 12:55] (current) – [Cooling Fan] niccolo
Line 412: Line 412:
 The pinout of the QNAP TS-120 fan is: The pinout of the QNAP TS-120 fan is:
  
-^ PIN  ^ Color  ^+^ PIN  ^ Color  ^ Function  ^
 |  1 | Black   | Ground  | |  1 | Black   | Ground  |
 |  2 | Yellow  | +12 v DC  | |  2 | Yellow  | +12 v DC  |
Line 419: Line 419:
  
  
-This is the standard pinout of a CPU fan with PWM speed control an tachometer sensor:+This is the **standard pinout of a CPU fan** with PWM speed control an tachometer sensor:
  
-^ CPU 4 pin Fan   ^^^ 
 ^ PIN  ^ Color   ^ Function          ^ ^ PIN  ^ Color   ^ Function          ^
 |    1 | Black   | Ground            | |    1 | Black   | Ground            |
Line 427: Line 426:
 |    3 | Yellow  | Tachometer Sense  | |    3 | Yellow  | Tachometer Sense  |
 |    4 | Blue    | PWM Control       | |    4 | Blue    | PWM Control       |
 +
 +
 +To control the fan speed you can use the **qcontrol** tool:
 +
 +<code>
 +qcontrol fanspeed {stop|silence|low|medium|high|full}
 +</code>
  
 ===== Automatic power-on ===== ===== Automatic power-on =====
doc/appunti/hardware/qnap_ts-120.1743503702.txt.gz · Last modified: 2025/04/01 12:35 by niccolo