User Tools

Site Tools


doc:appunti:hardware:tl-wr741nd

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
doc:appunti:hardware:tl-wr741nd [2014/02/23 23:20]
niccolo
doc:appunti:hardware:tl-wr741nd [2014/02/24 09:33] (current)
niccolo [TP-LINK TL-WR741ND]
Line 6: Line 6:
 ^ RAM    | 32 Mb  | ^ RAM    | 32 Mb  |
 ^ Flash  | 4 Mb  | ^ Flash  | 4 Mb  |
 +
 +  * [[http://​wiki.openwrt.org/​toh/​tp-link/​tl-wr741nd|OpenWrt wiki]]
 +  * [[http://​downloads.openwrt.org/​snapshots/​trunk/​ar71xx/​|Download OpenWrt for ar71xx Trunk]]
 +===== First OpenWrt installation =====
  
 This is the recipe to install OpenWrt, I used trunk (BARRIER BREAKER, Bleeding Edge, r39638): This is the recipe to install OpenWrt, I used trunk (BARRIER BREAKER, Bleeding Edge, r39638):
  
   - Reset the router to the factory defaults.   - Reset the router to the factory defaults.
-  - Download the [[http://​downloads.openwrt.org/​snapshots/​trunk/​ar71xx/​openwrt-ar71xx-generic-tl-wr741nd-v4-squashfs-factory.bin|*-factory.bin]] firmware image.+  - Download the [[http://​downloads.openwrt.org/​snapshots/​trunk/​ar71xx/​openwrt-ar71xx-generic-tl-wr741nd-v4-squashfs-factory.bin|*-factory.bin]] firmware image to a networked PC.
   - Connecto to ''​http://​192.168.0.1/'',​ login with //admin// //admin// and use the web-based procedure to upgrade the firmware, uploading the above image.   - Connecto to ''​http://​192.168.0.1/'',​ login with //admin// //admin// and use the web-based procedure to upgrade the firmware, uploading the above image.
   - Connect with ''​telenet 192.168.1.1''​ and set the root password.   - Connect with ''​telenet 192.168.1.1''​ and set the root password.
   - Connect with ''​ssh root@192.168.1.1''​   - Connect with ''​ssh root@192.168.1.1''​
 +
 +===== OpenWrt upgrade =====
 +
 +  - Download the [[http://​downloads.openwrt.org/​snapshots/​trunk/​ar71xx/​openwrt-ar71xx-generic-tl-wr741nd-v4-squashfs-sysupgrade.bin|*-sysupgrade.bin]] firmware image into the /tmp directory of the router, rename it as ''​tplink.bin''​.
 +  - Execute ''​mtd -r write /​tmp/​tplink.bin firmware''​.
 +
 +===== Exploring the system =====
  
 <​code>​ <​code>​
Line 62: Line 73:
   * libpcap, tcpdump-mini   * libpcap, tcpdump-mini
  
-This is the free space after installing them: +This is the **free space (84 kb)** after installing them: 
  
 <​code>​ <​code>​
doc/appunti/hardware/tl-wr741nd.1393194017.txt.gz ยท Last modified: 2014/02/23 23:20 by niccolo